NewTek Studio | Interactive Demo

What You Need to Know For Live Streaming From Your Multicam Studio

November 23, 2015 by Allan Tépper

by Allan Tépper

This article will cover details you need to know to plan for live streaming, whether from a standard TriCaster or one upgraded to include the TriCaster Advanced Edition. You’ll learn everything you need to know in terms of framerates, CDN (Content Distribution Networks), multi-tier fallback Internet connections, and how to reach more viewers and attract different audiences by live streaming to multiple platforms and services simultaneously, thanks to the optional TriCaster Advanced Edition.

Live webcasting to the general public has expanded and transformed the world of television. Now a live video broadcast can be shared to worldwide audiences with a relatively tiny investment. The live webcasting market also brings us many creative and moneymaking opportunities. With its built-in encoder, the NewTek TriCaster acts as the first required element, but there are many other details to take into account, so I wrote this article to prepare you for them.

Sections in this article

  • A very short course in television framerates
  • Fundamentals of live webcasting

    • What’s a CDN?
    • Why do I need a CDN?
    • Mitigating risks
    • How much bandwidth do you need to stream live?
  • Publish your highlight video clips to multiple social networks simultaneously with TriCaster Advanced Edition **A very short course in television **framerates

I have gone into great depth about spatial resolution, temporal resolution (framerates) and interlaced versus progressive in other articles, including the very recent What’s the Best Camera for My Live TV Studio. In this article you’re reading now, I’ll keep it as short as possible for the purpose of live streaming, so unlike that one, here I’m purposefully excluding film framerates and extinct television framerates that stopped being used in 1953.

If you produce for a 1080HD channel; if your program has less movement (i.e. talking heads), then you have the option to produce programming in 1080p (even though for live streaming, you may reduce it to a lower spatial resolution like 720p. In other words, you can produce and record at 1080p for later on-demand playback and stream in a lower one):

  • 1080/23.976p (At publication time of this article, TriCaster menus show it as “24” but it’s truly 23.976 which is proper for television.)
  • 1080/25p (Only available with NewTek international models.)
  • 1080/29.97p (At publication time of this article, TriCaster menus show it as “30” but it’s truly 29.97 which is proper for television.) (Sports producers: keep reading in this section for higher framerates.)

If you live in a PAL or ex PAL country, 25p will be an excellent option for you. If you live in an NTSC or ex NTSC country, you could save on bandwidth (or have less compression per frame with the same bandwidth) by using 23.976p. That’s what I would do in an NTSC or ex NTSC area if it were mainly a “talking head” show, with very little movement. Also, all of these framerates are compatible with all important web services and with all recent mobile phones and tablets. The important detail from the last sentence is framerates. For some tablets or phones that aren’t so recent and whose screen resolution is lower than 1920x1080, it will be necessary to “scale” or reduce the number of pixels, which is done automatically with many online video services. Fortunately, as opposed to temporal resolution, spatial resolution (pixel count) is very scalable without affecting the visual look. It just fits perfectly on different screen sizes with different spatial resolutions.

If you produce programs for a sports over-the-air TV channel, it’s very likely that the channel has chosen to work with 720p, since that system favors temporal resolution due to the fast movement, with a mild sacrifice in spatial resolution. So if you’re producing material for a PAL or ex PAL sports TV station, you’ll be best served by producing 720/50p, which can also be expressed as 720p50. On the other hand, if you’re producing material for an ex NTSC sports station, you’ll be best served by producing 720/59.94p, which can also be expressed as 720p59.94. However, if you plan to webcast your signal, either live or on demand, —or if you plan to distribute it some other way so it reaches mobile devices (i.e. tablets and phones)— you should keep in mind that up until now, there are great limitations of high framerates (50p or 59.94p) to those destinations. It’s true that YouTube and YouTube Live are (to my knowledge) the first to offer 59.94p for the web (Livestream and Vimeo still limit us to 29.97p maximum… If you send 50p or 59.94p to Livestream or Vimeo, they’ll drop every other frame), there’s another problem that is probably even more critical: The majority of tablets and phones have the same limitations of 30 frames per second. Even the brand new iPhone 6s and iPhone 6s Plus limit playback on the internal screen to under 30 frames per second. If you create material at 50p or 59.94p, those devices will end up playing half: 25p or 29.97p. Your viewers that see it on those devices that are limited to 30 fps will see something quite different from what they’ll see on TV sets or computers… or on some very recent tablets and phones. They won’t only see half of the framerate: The vital relationship between framerate and shutter speed will be lost, and hence it will have an inconsistent look. So for sports TV production, we have to decide what’s most important: maximum fluidity on TV sets (50p or 59.94p) or visual consistency across all devices, large and small, at 29.97p, 25p or 23.976p (depending upon availability in your TriCaster model and in your cameras).

If you have heard of “720/60p” or “720p60”, it’s very likely that the original source of the information was rounding it up from 59.94 to 60, either intentionally or innocently. In fact, at publication time of this article, that’s the case even in the menus in NewTek TriCaster products. So you now know that NewTek, some camera manufacturers, and even some TV channels often round the number for simplicity or space sake. Integer numbers like 30.000 and 60.000 really haven’t been a television standard since the United States colorized the monochrome system back in 1953. However, some innocent engineers and even camera manufacturers have fallen into the trap of taking those rounded numbers literally (for example, the Canon 5D MKII camera, before a firmware update, supplied exactly 30.000 frames per second, which caused lots of problems, since it was non-standard.)

Fundamentals of live webcasting

To webcast live to the entire world with your TriCaster (or any other system), you require a very good Internet connection where you are so you can send an ideal audio/video signal to your CDN.

  • What’s a CDN? CDN is an acronym for Content Delivery Network. Some examples of CDN services include Akamai, LiveStream, Microsoft Azure, Twitch.tv, UStream, and You Tube Live. Some CDNs require payment. Others are free, because in many cases they insert their own advertising.

  • Why do I need a CDN? You need a CDN because without it, it would be nearly impossible to have enough bandwidth to handle your potentially thousands or millions of live viewers. It will be enough of a challenge to get enough reliable bandwidth to transmit a high quality signal from wherever you are to your CDN.

  • Mitigating risks It’s highly recommended to have at least two alternate Internet connections available, in case the first one fails. Some experts recommend the use of up to five independent Internet connections to cover any possible scenario. Although the TriCaster has its own built-in encoder for web streaming, if you are going to connect with more than one ISP (Internet service provider) simultaneously, you should really have a separate encoder for each one. (Additional encoders are available from other manufacturers and vary greatly in price. They are available from companies with varying selling prices, from Elemental to Matrox and Teradek.)

MatroxAbove is an example of the Matrox Monarch HDX streaming encoder, which accepts either HDMI or SDI input. It can also make an H.264 recording on an SDHC card, and that recording can be at a higher bitrate than the live streaming setting. This can be useful as a backup recording of the one made in your TriCaster.

Some CDNs even allow you to initiate simultaneous connections with each encoder and ISP, with a fallback priority order assigned by you. Some ISP examples in the United States might be prioritized as follows:

  1. Comcast Xfinity
  2. T-Mobile
  3. Verizon
  4. Sprint
  5. AT&T However, if you are willing to let your transmission go “off air” briefly during an emergency while you switch from one Internet provider to another and reconnect, you could get by using the TriCaster’s built-in encoder for all of your Internet providers. The built-in encoder in TriCasters is very good. However, one other reason to use an independent encoder is if you are planning to take advantage of the TriCaster feature called Video pass-through (available with the TriCaster 410, TriCaster 460 and TriCaster 8000), which ensures that as long as there is AC power, audio and video from input 4 on the TriCaster 410 (or input 8 on 8-input models) is instantly routed to output 1 in a case of a catastrophic software condition.

If you are concerned about having a mission-critical live webcast, then you must consider several possible potential points of failure:

  • Electrical power failure
  • A camera failure
  • A cable failure between a camera and a TriCaster
  • A catastrophic software or hardware condition in a TriCaster
  • A failure in one of your ISPs (Internet service providers that send the signal from you to your CDN) How far you go to cover yourself against possible failures will depend upon the mission-criticalness of your live broadcast and your budget. To give you an extreme example, when Discovery Channel subcontracted Mobile Studios to simulcast the live event of Nik Wallenda crossing the Grand Canyon area gorge over a tightrope in two languages for Latin America in June 2013, Mobile Studio acquired a total of six TriCaster units. Five of the six TriCasters were each assigned to a specific feed, while the remaining TriCaster unit was held as a backup, pre-configured for each feed, to serve as a backup. Fortunately, the backup TriCaster was not necessary, but Mobile Studio wanted to be sure to have a mission-critical broadcast for its client, Discovery Channel.

In my experience and that of my colleagues, there is a higher probability of an electrical power failure or a local ISP failure than a TriCaster failure, so if I were you and needed a semi-mission critical webcast, I would prioritize the standby electricity and additional simultaneous ISPs, together with standalone encoders for each. If your encoders and TriCaster use HDMI, then you’ll need an HDMI distribution amplifier to feed each encoder. Likewise, if your TriCaster and standalone encoders use SDI, you’ll need an SDI distribution amplifier to feed each encoder. Either distribution amplifier will divide the digital audio/video signal for each independent encoder.

  • How much bandwidth do you need to stream live? First, we need to clarify the difference between upload speed and download speed. Many Internet providers tend to advertise the download speed because the majority of users are interested in knowing how fast they can download content. They also do that because usually the download speed is much faster, and, therefore sounds more impressive. However, for live streaming, we are concerned about the upload speed.

You must always seek the upload connection speed to match or exceed the largest resolution format you’re going to stream, since your chosen CDN —with adaptive bit rate— will be creating the smaller versions for you automatically. In the following budgetary examples, I am using the numbers recommended by the CDN called YouTube Live, not because I want to favor it, but because it’s the only one (or one of the few) that currently offers 59.94 progressive frames per second. That way we can be conservative when budgeting bandwidth, since the other CDNs will likely recommend similar values if and when they offer that framerate, and if and when you ever decide to stream a high framerate like 50p or 59.94p. (Earlier in this article, I warned about the limitations of high framerates of most tablets and mobile phones, most of which cannot play more than 30 frames per second.):

  • 1080p live (1920x1080) 6000 kb/s for video encoding, plus 128 kb/s for stereo audio. We should always allow for “headroom”, so I’d look for an ISP with 10,000 kb/s upload speed for each 1080p connection.
  • 720p live (1280x720) 4000 kb/s for video encoding, plus 128 kb/s for stereo audio. We should always allow for “headroom”, so I’d look for an ISP with 6,000 kb/s upload speed for each 720p connection.
  • 480p live, maintaining 16:9 (854x480) 2000 kb/s for video encoding, plus 128 kb/s for stereo audio. We should always allow for “headroom”, so I’d look for an ISP with 3,000 kb/s upload speed for each 480p connection. All of this assumes a dedicated Internet connection for the webcast, not shared with other people in the venue where you are located. All is currently based upon encoding with the H.264 códec. If and when the popular CDNs, NewTek and external encoders eventually switch to the more efficient HEVC/H.265 códec, then the bandwidth requirements will drop substantially. However, as of publication time of this article, NewTek and the popular CDNs are using H.264.

Also, all of the bandwidth numbers mentioned so far refer to the live encoding for live streaming. The ideal encoding for on-demand tends to be much less compressed. For example, for 1080p on demand to be uploaded to a service like Vimeo Pro or YouTube, I recommend a minimum of 20,000 kb/s knowing that they are going to recompress it for each size.

Publish your highlight video clips to multiple social networks simultaneously with TriCaster Advanced Edition

If you purchase the optional TriCaster Advanced Edition for your TriCaster, you’ll be able to publish highlight video clips and stills to multiple social networks simultaneously, while you continue to record and broadcast live. In fact, you can even do it to multiple accounts to which you have access in any given social network, so for example, you can publish them simultaneously to your personal account, your TV station’s account, and the account that belongs to one of your advertisers. Those social networks can include Facebook, Twitter, YouTube and more.

If you do this, then you will be consuming more upload bandwidth, so you should get an even better ISP upload bandwidth than what I quoted in the prior section.

About the Author

Born in Connecticut, United States, Allan Tépper is a bilingual consultant, multi-title author, tech journalist, translator, and language activist who has been working with professional audio and video since the early eighties. Since 1994, Tépper has been consulting both end-users and manufacturers through his Florida company. Via TecnoTur, Tépper has been giving video tech seminars in several South Florida’s universities and training centers, and in a half-dozen Latin American countries, in their native language. Tépper has been a frequent radio/TV guest on several South Florida, Guatemalan, and Venezuelan radio and TV stations, and he currently conducts the CapicúaFM radio program. As a certified ATA (American Translators Association) translator, Tépper has translated and localized dozens of advertisements, catalogs, software, and technical manuals for the Spanish and Latin American markets. He has also written contracted white papers for manufacturers. Over the past 18 years, Tépper’s articles have been published or quoted in more than a dozen magazines, newspapers, and electronic media in Latin America. Since 2008, Allan Tépper’s articles have been published frequently —in English— in ProVideo Coalition magazine. More info at AllanTépper.com

FTC Disclosure

NewTek sponsored this article after receiving Allan Tépper’s proposal. As of the publishing date of this article, Allan Tépper has no commercial connection with Akamai, AT&T/U-verse, Comcast/Xfinity, Facebook, Livestream, Matrox, Microsoft Azure, Sprint, T-Mobile, Twitter, Verizon, Tally Lights LLC, Twitch.tv, UStream or YouTube other than that some of them have sent him review units or have contracted him to do consulting, technical writing or translations in the past. The words and opinions of Allan Tépper expressed herein are his own.

More Articles by Allan Tépper

Share this article:

Live Production Tips, Sports Production Tips, TriCaster, Video for Business, Video Production Tips,

Akamai, Allan Tépper, CDN, Content Distribution Networks, LiveStream, Matrox Monarch HDX, Microsoft Azure, Teradek, TriCaster, TriCaster Advanced Edition, Twitch.tv, UStream, YouTube Live,

NewTek 产品

NewTek 拥有遍布世界各地的经销商网络。他们全部都熟知我们的产品,是视频制作和流媒体行业内的专家。

使用本工具寻找附近的 NewTek 经销商。



获取关于 NewTek 系统和 NDI 实时制作工作流的专业建议,或者允许我们在您和我们的当地合作伙伴之间进行匹配,让我们的解决方案专家为您提供帮助。

Chat with
Tech Support
Chat with a Sales Specialist